Dose capsule filling machine and sealing ring gap adjustment plate
Capsule filling machine dose plate and pad gap 0.05-0.15mm, adjustment method: Remove the punch holder, retaining the pink part, seals, loosen the guide screws, fixing screws, turn the adjustment screw with a feeler piece uniform regulation. Upon completion, tighten the retaining screw and guide screws, again with a feeler piece duplicate detection time (the characteristics of the institution to the next dose disk plane as the base, three regulatory agencies, the gap uniform, stable measurement differences, powder utilization, washable installation convenient for the domestic original). Require hand turn after reaching the main motor shaft to rotate even feel prevail. |
