Clean the automatic hard capsule filling machine mold
After a capsule filling over, turn off the power and remove the hopper rises.
2 Remove the feed sensor and the cover plate on the plunger and rack all out (punch on a stainless steel cart, head, face outward, neatly stacked), the feed tray of powder removed (no contamination) with plastic bottles and post library.
3 metering plate, copper blocks, modules, polishing machines, vacuum cleaners, etc. all need washable machine parts with a special tool to remove, clean light placed on trolleys, screw placed in the receptacle concentrated.
4 Replace the species will balloon fork, empty capsule hopper, vacuum with a special tool to remove the light placed on the trolley.
5 Remove the capsule filling machine dies pushed to between washing container, mercerized towels, hot water washing machine parts, removing the adhesion of dust and residue, and finally purified water and then scrub it again.
6 sensor must light demolition light, with a towel dipped in 75% ethanol mercerized wipe to clean water is unavailable.
7 After all parts are clean towel with mercerized, neatly placed on a cart frame, after the inventory number, push the car to the inter-container dry dry.
8 Place the dried capsule filling machine dies request a refund for mold into custody between the die box. |
